Top Qulaity HDF for Floor-manufacture,factory,supplier from China

    HDF Fiberboard has a wide range of uses, and can be used instead of general boards in construction, furniture manufacturing, ships, and aircraft. Such as wall panels, floors, cement formwork, ceilings, hollow door panels, furniture panels, etc.        1. Furniture manufacturing: At present, fiberboard is mainly used to replace natural wood for furniture production. It can produce all kinds of panel combination furniture or disassembled furniture.        2.

What is Black Core HDF?    The Black Core HDF floor is a floor made of this carbon crystal.    Carbon crystal is a kind of microcrystalline carbon particles purified from minerals, commonly known as high carbon graphite.

MDF HDF Details  Size:1220*2440 1250*2500 or customized sizeThickness:1-30mmGlue:E0 /E1 /E2Material:Polar pine combiDensity:650-980 kg/m3Certificate:ISO, SGS, FSC,P2Moisture Content:4-6%Usage:for laminating board, furniture back panel, flooring, interior and exterior decorationMOQ:1X40HQPayment Term:T/T or 100% LC at sightPacking:Standard exporting palletsDelivery time:20 days after received dopositMDF HDF Properties    EN622-5:2009 MDF-GPPropertyTest MethodUnitRanges of nominal thickness (mm)1.8-2.52.5-44-66-99-1212-1919-3030-45＞45Swelling in Thickness 24 hEN317%45353

1. The use of particleboard in flooring:Particleboard is used as flooring material in temporary structures with less load. It is also widely used as a covering for hardwood floors because hardwood planks have low resistance to scratches to protect them. Wood veneer particleboard or laminated particleboard is used for floors where a finished aesthetic look is desired.2. Use of particleboard in floor underlayment:Particleboard is widely used as floor underlayment or as a basis for parquet, wooden or carpet floors.

      The Invention of Wood-based Panels     The invention of wood-based panels can be traced back to 3000 BC. At the beginning of the 1st century BC, the Romans were already familiar with veneer manufacturing technology and plywood manufacturing principles.     In 1812, the French invented the veneer sawing machine.     In 1834, France issued a planer patent.     After 1844, the improved rotary cutting machine was officially used in industrial production.

          High-density fiberboard (English name: High Density Fiberboard, abbreviated as HDF) is a board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin, or other synthetic resins under heat and pressure.          The most advanced flat pressing complete production line in the world. Therefore, the physical performance is higher and better than that of medium-density fiberboard, and its density is usually above 800kg/M3.

  According to their different densities, they are divided into high-density boards, medium density boards and low-density boards. Due to its soft and high impact strength, the density of the density board is uniform after being pressed, and it is also easy to reprocess. It is a good material for making furniture in foreign countries,but its disadvantage is poor water resistance.

Advantages and disadvantages of MDFI. Advantages1. MDF processing is simpleMDF is very simple in the finishing process. Most paints and paints can be evenly applied on the MDF, and the effect is very good. It is the first choice for those who want to chase the paint effect.2. Beautiful appearance, easy to decorateMDF is a kind of decorative board with very exquisite appearance, and all kinds of wood veneer, adhesive tape film, veneer, light metal sheet lamp material can be pasted on MDF by glue to make its surface look more exquisite. Therefore, it is favored by everyone in home decoration.3.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.

What are the advantages and disadvantages of commonly used density boards in the production of showcases?Advantages of MDF1. Because the density board is hard, it is not easy to deform. At the same time, it is not easy to warp because it is made of fine wood chips. At the same time, the MDF for display cabinets has high bending resistance and impact resistance.2.

      High-density fiberboard （HDF) is a board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin, or other synthetic resins under heat and pressure.    The most advanced flat pressing complete production line in the world. Therefore, the physical performance is higher and better than that of medium-density fiberboard, and its density is usually above 800kg/M3.

Where are the functions of different density boards used?1. Standard board: Standard board is a material with a smooth side and a textured finish. It is used for cabinets, drawer bottoms and wall panels that belong to hidden parts.2. Glazed panel: Glazed panel is the surface layer that has been painted, often pasted with facing bricks or stamped into facing bricks or noodle patterns, used for wall panels or wall panels around bathtubs.3. Plastic veneer: Plastic veneer is used for sliding doors, which is good in decoration and easy to clean.

Product performance  The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.   The board surface texture is fine and smooth.

Advantages of MDF1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machining performance. It can be pasted with sliced veneer, patterns and novel and beautiful decorative papers. Therefore, it is very popular in home decoration and is often used to make furniture and partitions.3. It can be used as the middle frame and middle clip strip in the modern decorative frameless painting.

1. Physical and mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength and elastic modulus are good. However, because MDF is made of logs that are ground into fibers, which completely changes the structure of the wood, it has higher moisture absorption, water absorption performance, and higher thickness expansion rate, and its nail holding power is worse than that of particleboard.2.

What are the factors that affect the price of density board?  1. The production of density board depends heavily on the stable supply of wood raw materials, so the price of wood affects the price of density board.2. Formaldehyde is one of the main ingredients for the production of density boards. The price of formaldehyde is highly correlated with the price of density boards. At the same time, the raw material for formaldehyde production is mainly methanol. Therefore, the prices of fossil energy such as oil, natural gas and coal also affect the price of density boards.3.

     Our maximum important merchandise include: MDF, Finished MDF, HDF, particle board, with many superior imported equipments and production lines, clearly supplying capability now not less than 30000 cubic meters monthly.     All manufacturing nicely adapt to the USA, India, Middle-east, South Asia, Europe, Center & South America, many countries and regions, nicely used and in shape for furnishings, decorations and creation industries.Size1220*2440mmThickness12mmCertificationFSC, CE, ISOMOQ20 CbmDensity600-700 Kg/CbmGlueWBP Mdi Phenolic E0 E1 E2Moisture6-8%T

      MDF is mainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, because the density of high-density boards is too high. It cracks easily, so there is no way to make furniture.       Generally, HDF is used for indoor and outdoor decoration, office and civilian furniture, audio, and vehicle interior decoration. It is also a good material for packaging.

MDF Mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength, and elastic modulus are better than particleboard.

Product performance    The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.     The board surface texture is fine and smooth. When the ambient temperature and humidity change, the size stability is good, and the surface decoration treatment is easy.

     Our most vital products include: Particle board, OSB, MDF, HDF,Finished MDF, with many superior imported equipments and manufacturing traces, truly offering capability not less than 30,000 cubic meters monthly.     All production properly adapt to The United States, India, Middle-east, South Asia, Europe, Middle & South America, many nations and areas, well used and in shape for furnishings, decorations and production industries.     We constantly insist on "High-quality first, Service-first" making standard products and comu

The main purpose of MDF FiberboardMainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, and high-density boards are used for interior decoration. Exterior decoration, office and civilian furniture, audio, vehicle interior decoration, can also be used as anti-static floor in computer room and production material for wall panels, security doors, wall panels, partitions, etc. It is also a good material for packaging.

Features of MDF1. The material is uniform, the layer structure is dense, the surface is smooth and clean, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and layer; non-toxic, tasteless, non-radiation, good air permeability;2. Good heat insulation performance, no aging, strong adhesion;3.

Medium-density fiberboard is made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other synthetic resin, and pressed under heat and pressure to form a board with a density in the range of 0.50-0.88g/cm3, and other suitable materials can also be added. Additives to improve sheet properties.MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses, so it is widely used in furniture manufacturing, construction, and interior decoration.