Product3 - Bulk Cloned-manufacture,factory,supplier from China

 Advantages of FR MDF/Fire Resistant MDF 1.Excellent flame retardant performance: Comply with the B1 regulations of GB8624-2012 "Classification of Combustion behavior of Building Materials and Products".2.Excellent environmental protection performance: the amount of formaldehyde released reaches the level of E0 and E1 in GB18580-2017 "Limits of formaldehyde release in wood-based panels and their products for interior decoration materials"3.

Product performance  The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.   The board surface texture is fine and smooth.

What are the common wood products in life that are MDF?    The common one may be the table. Some people think that the table should be made of solid wood, but in fact, many tables are made of density board, and then the surface is veneered to make the surface resistant to dirt and wear, and not easy to change color.

MDF Products Display     MDF (Medium Density Fibreboard) is by far the most commonly used carpentry material and it is compatible with many different finishes – including simple and lacquered finishes, glued to natural boards, melamine boards and even graphic prints. They can also be used in other places, such as cladding of walls and doors.

The Difference Between Plywood and MDFWood fibers, resins or glues are used to make MDF. These bond together under pressure and heat to form a cardboard. Plywood is made by gluing thin hardwoods between pieces of wood.Plywood is made of solid wood while MDF is made of wood fibers. In manufacturing, there is some waste in plywood production, whereas there is no waste in MDF production.When comparing the two, it can be seen that plywood has attractive grains or knots. However, these particles or nodules are not visible in MDF.Furniture can easily be made from MDF instead of plywood.

The differences between flame-retardant MDF and ordinary MDF are analyzed one by one as follows: 1. Color The color of flame-retardant MDF is dyed with red dye, so red MDF is not necessarily flame-retardant MDF Board, this point cannot be identified. 2. Physical and mechanical properties Due to the addition of flame retardants, the water-absorbing expansion of the board is affected to a certain extent. Therefore, testing the water-absorbing expansion coefficient of the board can preliminarily judge whether the flame-retardant MDF can meet the use requirements.

Medium density fiberboard is a kind of man-made board made of wood or plant fiber through mechanical separation and chemical treatment, mixed with adhesive and waterproof agent, and then formed by high temperature and high pressure.

        The reason why anything appears must conform to the laws of the market. The same is true for MDF, which can be widely used mainly because of its advantages in performance and cost.

The reason for the deformation of density board furniture is here?    We all know that MDF has a wide range of applications. However, furniture made of this kind of board often has such a problem: the furniture board is deformed, which is very annoying.It not only seriously affects the normal use of our furniture, but also has a bad influence on family life. We knowThere are many reasons for this problem, and we will introduce them in detail below.1.

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.

Prospects for the density fiberboard industry    Compared with natural solid wood boards, MDF is resistant to decay and has no tree burls and knots. It is easier to process various shapes, and MDF has a flat surface, is not easy to deform, and has superior bending strength. It is widely used in furniture production and construction.

What are the advantages of decorative board MDF?    Density board, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Due to its softness, impact resistance and easy reprocessing, MDF is a good material for making furniture abroad. Density board is easy to finishing.

Today I will tell you which one is better, E1 density board or E2, and the characteristics of MDF?Which is better, E1 density board or E2?    Since the glue used in the processing process will release carcinogenic formaldehyde, standards have been formulated according to the amount of formaldehyde released, including European standards, national standards, and American standards.

Is MDF or solid wood particle board better? Compare the advantages and disadvantages of the two:MDF:Advantages: The material is delicate, the edge sealing of the cutting surface is well done, it is not easy to open the glue, and it is convenient to make various shapes, so it is often used to make door panels or back panels.2. Disadvantages: The base material is powder, and the glue used is more than particle board, so it is easy to have environmental protection problems.

     Particleboard, as a very common decorative material at home and abroad, in addition to conventional furniture manufacturing, particleboard actually has other wider uses, such as suspended ceilings, partition walls, interior decoration, etc.Particleboard has uniform density and thickness, and smooth surface. It is a good veneer substrate. Industrial-grade particleboard can be used in many veneer materials and is very suitable as a veneer substrate.  2.Particleboard furniture refers to furniture that directly uses particleboard as a finish.

    Oriented strand board (OSB), also known as Ozon board, originated in the 1970s and developed from structural particle board-waffle board. Since the mid-1980s, it has developed rapidly in North America and Europe, and has begun to replace plywood in large quantities. For use with fiberboard.    Oriented strand board is a new type of high-strength environmental protection board.

An Introduction to OSB Board      OSB is Oriented Strand Board ,the upgrading of traditional particle board.

Characteristics of OSB1. Wide sources of raw materials and low prices.The raw materials of directional particle board are mainly small diameter wood of soft coniferous wood and broad-leaf wood, fast-growing thinning forest, such as eucalyptus, Chinese fir, poplar thinning wood, etc., with a wide range of sources.2. High output rateCompared with other types of wood-based boards, oriented particle board has a higher output rate.

     Our most vital products include: Particle board, OSB, MDF, HDF,Finished MDF, with many superior imported equipments and manufacturing traces, truly offering capability not less than 30,000 cubic meters monthly.     All production properly adapt to The United States, India, Middle-east, South Asia, Europe, Middle & South America, many nations and areas, well used and in shape for furnishings, decorations and production industries.     We constantly insist on "High-quality first, Service-first" making standard products and comu

    Medium density fiberboard is a kind of artificial board made from the thinned wood of branches, small diameter wood, fast-growing wood, bamboo and other plant materials with limited wood resources. The comprehensive utilization rate of wood is high, which conforms to China's forestry development policy and is conducive to the implementation of China's forestry sustainable development strategy.Medium density fiberboard DisplayProduct Certificates-SGS,ISO9001,FSC  

Fiberboard is a kind of man-made board made of wood fiber or other plant fibers with urea formaldehyde resin or other applicable adhesives. As it is soft and impact resistant, it has high strength, uniform density after pressing, and is easy to reprocess, but its disadvantage is poor water resistance.Advantages1.Fiberboard is easy to be coated.

Medium Density Fiberboard classification:       According to the density, it can be divided into high-density board, medium-density board, and low-density board (the density of medium-density board is 550 kg-880 kg/m3, and the density of high-density board is more than 880 kg/m3). Commonly used specifications are 1220*2440mm and 1525*2440mm, and the thickness is 2.0mm~25mm.

  According to their different densities, they are divided into high-density boards, medium density boards and low-density boards. Due to its soft and high impact strength, the density of the density board is uniform after being pressed, and it is also easy to reprocess. It is a good material for making furniture in foreign countries,but its disadvantage is poor water resistance.

      Density board is called density fiberboard. It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.     According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard.