Pro duct8 - Bulk Cloned-manufacture,factory,supplier from China

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard.

  1. The characteristics of density board: the surface of density board is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is decorative. However, density boards have poor moisture resistance, and in comparison, density boards have poorer nail-holding power than particle boards. If the screws loosen after tightening, it is difficult to fix them again due to the low strength of density boards.2. The use of MDF: mainly used for laminate flooring, door panels, partition walls, furniture, etc.

What is carbon crystal wooden door？ Carbon crystal is a kind of microcrystalline carbon particles purified from minerals, commonly known as high carbon graphite. This material is harder than steel and lighter than aluminum, it is high temperature resistant, corrosion resistant, and has a stable molecular structure. Carbon crystal fiber board, waterproof, zero formaldehyde, ultra-high density, is a high-end product worth having. And the carbon crystal wooden door, the wooden door made of this carbon element crystal.Advantages of carbon crystal wood doors1.

    Oriented strand board (OSB), also known as Ozon board, originated in the 1970s and developed from structural particle board-waffle board. Since the mid-1980s, it has developed rapidly in North America and Europe, and has begun to replace plywood in large quantities. For use with fiberboard.    Oriented strand board is a new type of high-strength environmental protection board.

     It is said that wall panels originated in England in the 16th century. Everyone knows that the climate in England is cold and humid. In order to block the damp and cold lower part of the wall, wall panels are used for insulation.    Another theory goes back to the Netherlands in 1300. At that time, Europe was in the dark Middle Ages, and knights wearing armor and holding long swords often scratched the walls of castles or palaces inadvertently. Protect with wood.     At the beginning, wall panels were mainly used in castles and palaces.

How is the quality of MDF furniture?        1. Density board is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. Because of its soft quality, impact resistance, high strength, uniform density after pressing, it is easy to reprocess, but the disadvantage is poor water resistance.        2. The density board is easy to be finished and processed. All kinds of paints and paints can be evenly coated on the density board.

      The Invention of Wood-based Panels     The invention of wood-based panels can be traced back to 3000 BC. At the beginning of the 1st century BC, the Romans were already familiar with veneer manufacturing technology and plywood manufacturing principles.     In 1812, the French invented the veneer sawing machine.     In 1834, France issued a planer patent.     After 1844, the improved rotary cutting machine was officially used in industrial production.

Everyone knows that density board is widely used in making furniture or decorating partitions because of its uniform structure, fine material, stable performance and easy processing. Everyone is curious, how to distinguish the quality of density board?Let me tell you something.1. Surface cleanliness: There should be no obvious particles on the surface of the density board with good surface cleanliness. Particles are caused by impurities brought in during the pressing process, which not only affects the appearance, but also makes the paint film easy to peel off.2.

App Features:Because of the three-layer criss-cross structure, Ozon board is more uniform than ordinary particle board, has better toughness, strong nail holding power, and is not easy to swell when it is damp. It is used as a house structure abroad and is strong. But it is relatively thick, the surface is uneven and difficult to handle, and it is rarely made into furniture.  When Ozon board came to China, it has almost become an upgraded substitute of large core board, with good quality and high price. It is especially suitable for the base layer of the background wall.

The raw materials for making particleboard include wood or wood fiber materials, adhesives and additives. The former accounts for more than 90% of the dry weight of the board. The wood raw materials are mostly taken from felled wood in the forest area, small diameter wood (usually less than 8 cm in diameter), felling residues and wood processing residues. Wood chips, shavings, wood filaments, sawdust, etc. processed into flakes, strips, needles and granules are called chips.

   The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000. After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.    After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

Product DetailsSize1220*2440mmThickness12mmCertificationFSC, CE, ISOMOQ20 CbmDensity600-700 Kg/CbmGlueWBP Mdi Phenolic E0 E1 E2Moisture6-8%Thickness Tolerance+-0.2mmSize Tolerance+-2mmTransport Packageby Standard Exporting PalletsSpecification1220*2440OriginChinaHS Code4411142900Production Capacity30000 Cbm Monthly

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

What is OSB ?Oriented Strand Board (OSB) is a kind of fresh wood with large diameter and straight trunk as raw material. It is processed along the direction of wood grain by special slicing processing equipment.

Features of MDF:1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machinability. It can be pasted with sliced veneer or with novel and beautiful patterns.

Fiberboard is a kind of man-made board made of wood fiber or other plant fibers with urea formaldehyde resin or other applicable adhesives. As it is soft and impact resistant, it has high strength, uniform density after pressing, and is easy to reprocess, but its disadvantage is poor water resistance.Advantages1.Fiberboard is easy to be coated.

The differences between flame-retardant MDF and ordinary MDF are analyzed one by one as follows: 1. Color The color of flame-retardant MDF is dyed with red dye, so red MDF is not necessarily flame-retardant MDF Board, this point cannot be identified. 2. Physical and mechanical properties Due to the addition of flame retardants, the water-absorbing expansion of the board is affected to a certain extent. Therefore, testing the water-absorbing expansion coefficient of the board can preliminarily judge whether the flame-retardant MDF can meet the use requirements.

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS  

     Density board is called medium density fiberboard（MDF) . It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure. According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard. It is widely used in the fields of furniture manufacturing and decoration in China.Xinhua Wood Show  Xinhua Wood Machinery  Gaotang County Xinhua Wood Industry Co., Ltd.

      Density board is called density fiberboard. It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.     According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard.

National Standard for Medium Density FiberboardMedium density fiberboard is a kind of man-made board with a density of about 0.5-0.88gcm3 after processing selected wood raw materials into fibers, adding urea-formaldehyde resin and other additives, and making it through a special process.

Why choose Xinhua Wood MDF boards?1. Competitive price.

  According to their different densities, they are divided into high-density boards, medium density boards and low-density boards. Due to its soft and high impact strength, the density of the density board is uniform after being pressed, and it is also easy to reprocess. It is a good material for making furniture in foreign countries,but its disadvantage is poor water resistance.

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.