Plain MDF-manufacture,factory,supplier from China

Product performance  The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.   The board surface texture is fine and smooth.

   MDF is a man-made board made of wood or plant fiber, mixed with adhesives and waterproofing agents, etc., and pressed under high temperature and high pressure. It is an ideal man-made board for furniture production.Advantages of MDF:Medium density fiberboard has uniform internal structure, moderate density, strong stability, not easy to deform or crack, and durable.2. Medium density fiberboard has a smooth surface, strong plasticity, and good production and processing performance.

Fiberboard is a kind of man-made board made of wood fiber or other plant fibers with urea formaldehyde resin or other applicable adhesives. As it is soft and impact resistant, it has high strength, uniform density after pressing, and is easy to reprocess, but its disadvantage is poor water resistance.Advantages1.Fiberboard is easy to be coated.

The Difference Between Plywood and MDFWood fibers, resins or glues are used to make MDF. These bond together under pressure and heat to form a cardboard. Plywood is made by gluing thin hardwoods between pieces of wood.Plywood is made of solid wood while MDF is made of wood fibers. In manufacturing, there is some waste in plywood production, whereas there is no waste in MDF production.When comparing the two, it can be seen that plywood has attractive grains or knots. However, these particles or nodules are not visible in MDF.Furniture can easily be made from MDF instead of plywood.

What is a Flame Retardant MDF Board?The flame retardant MDF board is a kind of board that can suppress the flame burning speed in the ignited state, or directly extinguish the flame.

The difference between flame-retardant MDF and ordinary MDF Appearance difference: Flame-retardant MDF is a kind of functional MDF. From the appearance, it is red, mainly because the fiber is dyed with red dye according to the international customary calendar, so as to distinguish it from ordinary MDF. Physical and mechanical properties Flame-retardant MDF is also MDF. First of all, it must have the physical mechanics of ordinary MDF to meet the use requirements.

1. Introduction of MDFMDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. A kind of man-made board.2. MDF sizeThe thickness of MDF is generally between 3mm-30mm, and the density of MDF is very high. Generally, the choice of MDF depends on the density of MDF to determine the quality of MDF.

MDF Products Display     MDF (Medium Density Fibreboard) is by far the most commonly used carpentry material and it is compatible with many different finishes – including simple and lacquered finishes, glued to natural boards, melamine boards and even graphic prints. They can also be used in other places, such as cladding of walls and doors.

How to deal with the pungent smell of the density board?1） Keep the room ventilated and paint the MDF with anti-mildew paint.Put the density board in a dry place at home, keep the room ventilated, and it can be exposed to the sun if it is severely damp. Go to the market to buy anti-mildew paint and paint the MDF. It can play a certain role in preventing moisture and mildew, but pay attention to the quality of the paint and choose non-toxic and tasteless products.

MDF Mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength, and elastic modulus are better than particleboard.

With the continuous development of science and technology, carbon crystal panels or Black Core MDF, as a new type of decoration material, have gradually attracted people's attention. So, what are the advantages and disadvantages of Black Core MDF in whole house decoration? Let's take a look together.First, the advantages of Black Core MDF1). Environmental protection and healthBlack Core MDF is a kind of non-toxic, tasteless, non-radiation environmental protection material, which will not cause any harm to the human body.

What is the difference between particleboard and MDF?Nowadays, there are more and more types of furniture on the market, and furniture panels are also emerging in an endless stream. Consumers consider their panels in detail when purchasing furniture. Do you know what is the main difference between MDF and Particleboard? Let’s take a look at the differences between them.Particleboard:Particleboard is a kind of man-made board that is glued together under the action of heat and pressure after adhesive is applied.

     The density of medium density board is between the density of high density board and low density board, generally 650~880kg/m. The common specification is 2440mm*1220mm, and the thickness is 1mm, 3mm, 5mm, 9mm, 12mm, 15mm, 18mm, 25mm, etc. . MDF with other special specifications and thicknesses can also be customized.How to identify high-quality MDF?1.Surface cleanliness: There should be no obvious particles on the surface of the density board with good surface cleanliness.

MDF HDF Details  Size:1220*2440 1250*2500 or customized sizeThickness:1-30mmGlue:E0 /E1 /E2Material:Polar pine combiDensity:650-980 kg/m3Certificate:ISO, SGS, FSC,P2Moisture Content:4-6%Usage:for laminating board, furniture back panel, flooring, interior and exterior decorationMOQ:1X40HQPayment Term:T/T or 100% LC at sightPacking:Standard exporting palletsDelivery time:20 days after received dopositMDF HDF Properties    EN622-5:2009 MDF-GPPropertyTest MethodUnitRanges of nominal thickness (mm)1.8-2.52.5-44-66-99-1212-1919-3030-45＞45Swelling in Thickness 24 hEN317%45353

    Medium density fiberboard is made of wood fiber and other fibers as raw materials, prepared by fiber, then applied with synthetic glue and other functional materials, and pressed into boards with different thicknesses and densities under heat and pressure. Among them, the moisture-proof MDF is made of modified melamine cyanamide adhesive or MDI type adhesive, and the use of waterproofing agent is improved at the same time.

    Moldability: Since the MDF is fibrous, it is beneficial for the machine to do carving, molding, radian and other shapes. The molded door panels and European-style lines on the market are all MDF, so MDF is more suitable for the back of the wardrobe and Door panels and moldings.Matters needing attention in making wardrobe with MDF1. From the appearance, check whether the thickness and density are uniform, whether the corners are damaged, whether there are layers, bulges, carbonization, etc., and whether there are soft parts.2.

What are the common wood products in life that are MDF?    The common one may be the table. Some people think that the table should be made of solid wood, but in fact, many tables are made of density board, and then the surface is veneered to make the surface resistant to dirt and wear, and not easy to change color.

Today I will tell you which one is better, E1 density board or E2, and the characteristics of MDF?Which is better, E1 density board or E2?    Since the glue used in the processing process will release carcinogenic formaldehyde, standards have been formulated according to the amount of formaldehyde released, including European standards, national standards, and American standards.

What is medium density fiberboard (MDF)?      Medium density fiberboard (MDF) is a kind of man-made board made of hardwood, softwood fiber or other plant fiber, which is crushed, separated, dried, applied with urea-formaldehyde resin or other suitable adhesives, and then hot-pressed. Medium-density fiberboard (MDF), generally denser than plywood, is made of separated fibers, but like plywood can be used as a building material.

Why choose Xinhua Wood MDF boards?1. Competitive price.

MDF Products on show Products detailsProduct:MDFMaterial:Polar Pine Combi HardwoodGlue:MDI WBP Phenolic E0 E1 E2Size:1220*2440 1250*2500 mm or accept customizationThickness:6-45mm or accept customizationMOQ:20 CBMDelivery time:15 daysThickness tolerance:+-0.2mmSize Tolerance:+-2mmUsageRoof decking, furniture,packing,hoarding,signboards, portable building, constructional insolation boardQuestions about MDF products.Q 1.

The difference between density board and particle board    Solid wood particle board, also known as particle board, is different from MDF, which uses wood fiber and plant fiber as raw material, but uses log particles (small diameter wood, thinning wood, wood core, board skin, branch wood, etc.) The adhesive is processed by high temperature and high pressure.

MDF Mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength, and elastic modulus are better than particleboard.

The differences between flame-retardant MDF and ordinary MDF are analyzed one by one as follows: 1. Color The color of flame-retardant MDF is dyed with red dye, so red MDF is not necessarily flame-retardant MDF Board, this point cannot be identified. 2. Physical and mechanical properties Due to the addition of flame retardants, the water-absorbing expansion of the board is affected to a certain extent. Therefore, testing the water-absorbing expansion coefficient of the board can preliminarily judge whether the flame-retardant MDF can meet the use requirements.