Moisture-proof Fiberboard-manufacture,factory,supplier from China

    Medium density fiberboard is made of wood fiber and other fibers as raw materials, prepared by fiber, then applied with synthetic glue and other functional materials, and pressed into boards with different thicknesses and densities under heat and pressure. Among them, the moisture-proof MDF is made of modified melamine cyanamide adhesive or MDI type adhesive, and the use of waterproofing agent is improved at the same time.

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

Soak the common substrate and moisture-proof substrate in water at the same time, and the expansion rate of the common plate is significantly higher than that of the moisture-proof plate after two hours of expansion change. The moisture-proof board has good moisture-proof performance and is suitable for making kitchen furniture and bathroom furniture.Damp-proof board cannot be directly used on furniture, and decorative paper should be pasted on the surface. The normal practice is to soak the decorative paper in melamine solution, and then press it on after hot pressing.

      Waterproof and moisture-proof board is made by adding special materials that can improve the waterproof, moisture-proof and mildew-proof performance of wood-based panels during the production of medium-density fiberboard.   It is suitable for high-humidity areas and places where accidental humidity may occur, such as kitchens Cabinets, bathroom vanity, laundry cabinet. Marked in green.

     The Waterproof fiberboard originated in Europe. It is based on the production of ordinary fiberboard and added with a certain proportion of granular moisture-proof particles. The fiberboard made in this way can greatly reduce the degree of expansion after encountering water.             Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

Particleboard Quality Judgment1. From the appearance point of view, look at the size and shape of the wood chips in the center of the cross-section. The length is generally 5-10MM in length. If the length is too long, the structure is loose, and if it is too short, the deformation resistance is poor, and the so-called static bending strength does not meet the standard;2. The moisture resistance of wood-based panels depends on its density and moisture-proof agent.

FR MDF Advantages:1.The fireproof board has low hygroscopicity, stable water-absorbing thickness expansion rate, and excellent moisture-proof performance. It is especially suitable for secondary processing such as finishes, adhesives, and paints.

According to density, it can be divided into: high-density fiberboard, medium-density fiberboard, and low-density fiberboard (the density of medium-density fiberboard is 500 kg/m3-880 kg/m3, and the density of high-density fiberboard is ≥800 kg/m3).According to the national standard (GB/T 11718-2021), it is divided into: ordinary MDF, furniture MDF and load-bearing MDF.According to the use, it can be divided into: furniture board, floor base material, door panel base material, electronic circuit board, engraving and milling board, moisture-proof board, fire-proof board and line board

Carbon Crystal Panel and Its AdvantagesCarbon crystal panel is generally used in paint-free technology, with high environmental protection and good moisture resistance. In terms of materials, they all belong to composite boards. If they are under the same brand, the quality of carbon crystal boards is better. In contrast, carbon crystal panels are waterproof, moisture-proof, environmentally friendly, formaldehyde-free, crack-resistant and non-deformable. Carbon crystal plate is a new type of high-tech environmental protection material.

Instruction of Waterproof FiberboardWaterproof Fiberboard, also known as fiberboard , is an artificial board made of wood fiber or other plant fibers as raw materials and urea-formaldehyde resin or other suitable adhesives.Warehouse  Xinhua Wood Company Show  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

Carbon crystal panels are environmentally friendly, durable, moisture-proof, flame-retardant, sound-absorbing, anti-aging ...Advantages of Carbon Crystal MDF  Noise reductionThe carbon crystal wall panel has a good diffuse reflection for sound, and has a relatively buffering impact of the subwoofer; the sound insulation reached 29 decibels after testing, which is 13 decibels higher than the sound insulation of a 25 cm wall, which solves the incoming noise from the outside and the private space of life And office (such as conference room) interference noise.WaterproofThe carbon c

     The basic unit of fiberboard is separated wood fibers or fiber bundles. The raw materials for fiber production mainly come from forest cutting residues, such as branches, shoots, small diameter wood, etc; And wood processing residues, such as board edges, shavings, sawdust, etc. In addition, the wastes from chemical processing of forest products (such as tannin extract and hydrolytic residues) and other plant stems can be used to produce fibers. The fiber content of coniferous wood is high, and the fiber length is 30-50% longer than that of hardwood.

Advantages of MDF1. The density of medium density fiberboard is very high, so it is called MDF. Its surface can be pasted with melamine or wood veneer. Its physical properties are very good, the material is uniform, and there is no dehydration problem, so it will not be deformed by moisture.2. Medium density fiberboard is made of crushed plant fibers and pressed at high temperature, so the surface of this board is very smooth and square. It can be used not only as furniture materials, but also as decorative panels, light metal sheets, veneer, etc.3. Is MDF high in formaldehyde?1.

High Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fibers or other plant fibers with the application of urea-formaldehyde resin or other applicable adhesives.

The wood-based panel is formed by interweaving lignocellulose fibers and is made of its inherent adhesive properties. Adhesives and/or additives may be applied during manufacturing.Fiberboard, also known as density board, is a wood-based panel made of wood fiber or other vegetable fibers with urea formaldehyde resin or other applicable adhesives. Adhesives and/or additives may be applied during manufacturing. Fiberboard has the advantages of uniform material, small vertical and horizontal strength difference, and is not easy to crack. It is widely used.

Advantages of Carbon Crystal Plates or Black MDFCarbon crystal panels are environmentally friendly, durable, moisture-proof, flame-retardant, sound-absorbing, anti-aging and other practical and excellent features, helping you easily have a healthy, environmentally friendly and safe living home.Noise reductionThe carbon crystal wall panel has a good diffuse reflection for sound, and has a relatively buffering impact of the subwoofer; the sound insulation has reached 29 decibels after testing, which is 13 decibels higher than the sound insulation of a 25 cm wall, which solves the incoming noise

The wood-primarily based panel is fashioned by interweaving lignocellulose fibers and is made of its inherent adhesive properties. adhesives and/or components can be applied for the duration of production.Fiberboard, also called density board, is a wood-primarily based panel made from wood fiber or unique vegetable fibers with urea formaldehyde resin or different relevant adhesives. adhesives and/or components can be applied at some point of manufacturing. fiberboard has the blessings of uniform cloth, small vertical and horizontal power difference, and isn't easy to crack.

    Fiberboard, also referred to as density board, is a timber-primarily based panel made of wood fiber or exceptional vegetable fibers with urea formaldehyde resin or other relevant adhesives. adhesives and/or additives can be carried out sooner or later of manufacturing. fiberboard has the benefits of uniform , small vertical and horizontal power distinction, and isn't easy to crack. it's miles considerably used.

Medium Density Fiberboard (MDF) is a kind of man-made board. MDF is mainly made of plant fibers or wood fibers. It is formed after the fibers are crushed, separated, dried, and urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. Specifications of MDFXinhua Wood StoragesXinhua Wood Quality CertificationsXinhua Wood Introduction    Gaotang County Xinhua Wood Industry Co., Ltd. was established in 2010 . It covers an area of about 76,600 square meters.The company is located in Gaotang County, Liaocheng City,Shandong province, China.

      High-density fiberboard （HDF) is a board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin, or other synthetic resins under heat and pressure.    The most advanced flat pressing complete production line in the world. Therefore, the physical performance is higher and better than that of medium-density fiberboard, and its density is usually above 800kg/M3.

Medium Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Mainly used for laminate flooring, door panels, partition walls, furniture, etc.

    MDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. A kind of man-made board.The thickness of MDF is generally between 3mm-30mm, and the density of MDF is very high. Generally, the choice of MDF depends on the density of MDF to determine the quality of MDF. The density of MDF is generally It is in the range of 0.5-0.8g/cm³.

    Density board, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board.

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS