MDF for Door Furniture-manufacture,factory,supplier from China

The difference between particleboard and density board:1. Different usesDensity board is mainly used for composite floors, door panels, partition walls, furniture, etc. In home decoration,it is mainly used for surface treatment of mixed oil technology. It can be used as the back panel of the cabinet, but it is not suitable for the cabinet body. Particleboard can be painted and veneered in various ways, and can also be used to make cabinets.2.

      Product performance of medium density board: uniform material, dense layer structure, smooth and smooth surface, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and delaminate; non-toxic, tasteless, non-radiative, and good air permeability.MDF is mainly used for: laminate flooring, door panels, partition walls, furniture, etc., and is mainly used for the surface of mixed oil process in home decoration.Xinhua Wood Factory Scene  Xinhua Wood Machinery  Xinhua Wood IntroductionGaotang County Xinhua Wood Industry Co.,

      MDF is mainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, because the density of high-density boards is too high. It cracks easily, so there is no way to make furniture.       Generally, HDF is used for indoor and outdoor decoration, office and civilian furniture, audio, and vehicle interior decoration. It is also a good material for packaging.

Medium Density Fiberboard classification:       According to the density, it can be divided into high-density board, medium-density board, and low-density board (the density of medium-density board is 550 kg-880 kg/m3, and the density of high-density board is more than 880 kg/m3). Commonly used specifications are 1220*2440mm and 1525*2440mm, and the thickness is 2.0mm~25mm.

Advantages of MDF     1. The material is relatively thin, and the cutting surface will be sealed well when sealing the edge, so that it will not be easy to open the glue.     2. It is easy to press into various shapes, and it is easy to make shapes, so there are usually more door panels or back panelsXinhua Wood Factory Appearance  Xinhua Wood Machinery   Xinhua Wood Storages  Xinhua Wood Quality Certificates  Xinhua Wood IntroductionGaotang County Xinhua Wood Industry Co., Ltd.

   MDF is a man-made board made of wood or plant fiber, mixed with adhesives and waterproofing agents, etc., and pressed under high temperature and high pressure. It is an ideal man-made board for furniture production.Advantages of MDF:Medium density fiberboard has uniform internal structure, moderate density, strong stability, not easy to deform or crack, and durable.2. Medium density fiberboard has a smooth surface, strong plasticity, and good production and processing performance.

What is the difference between particleboard and MDF?Nowadays, there are more and more types of furniture on the market, and furniture panels are also emerging in an endless stream. Consumers consider their panels in detail when purchasing furniture. Do you know what is the main difference between MDF and Particleboard? Let’s take a look at the differences between them.Particleboard:Particleboard is a kind of man-made board that is glued together under the action of heat and pressure after adhesive is applied.

    Moldability: Since the MDF is fibrous, it is beneficial for the machine to do carving, molding, radian and other shapes. The molded door panels and European-style lines on the market are all MDF, so MDF is more suitable for the back of the wardrobe and Door panels and moldings.Matters needing attention in making wardrobe with MDF1. From the appearance, check whether the thickness and density are uniform, whether the corners are damaged, whether there are layers, bulges, carbonization, etc., and whether there are soft parts.2.

The main purpose of MDF FiberboardMainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, and high-density boards are used for interior decoration. Exterior decoration, office and civilian furniture, audio, vehicle interior decoration, can also be used as anti-static floor in computer room and production material for wall panels, security doors, wall panels, partitions, etc. It is also a good material for packaging.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.

Prospects for the density fiberboard industry    Compared with natural solid wood boards, MDF is resistant to decay and has no tree burls and knots. It is easier to process various shapes, and MDF has a flat surface, is not easy to deform, and has superior bending strength. It is widely used in furniture production and construction.

  1. The characteristics of density board: the surface of density board is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is decorative. However, density boards have poor moisture resistance, and in comparison, density boards have poorer nail-holding power than particle boards. If the screws loosen after tightening, it is difficult to fix them again due to the low strength of density boards.2. The use of MDF: mainly used for laminate flooring, door panels, partition walls, furniture, etc.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.

    HDF Fiberboard has a wide range of uses, and can be used instead of general boards in construction, furniture manufacturing, ships, and aircraft. Such as wall panels, floors, cement formwork, ceilings, hollow door panels, furniture panels, etc.        1. Furniture manufacturing: At present, fiberboard is mainly used to replace natural wood for furniture production. It can produce all kinds of panel combination furniture or disassembled furniture.        2.

How is the quality of MDF furniture?        1. Density board is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. Because of its soft quality, impact resistance, high strength, uniform density after pressing, it is easy to reprocess, but the disadvantage is poor water resistance.        2. The density board is easy to be finished and processed. All kinds of paints and paints can be evenly coated on the density board.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard.

The benefits of MDF:Good flexibility (Because the door panel is often pushed and pulled to open and close, if it is too hard, it will easily lead to cracking, so this advantage of MDF can just be used)Easy to shape (because it is a powder structure, and very flat and smooth, so it is easy to shape, which just meets the needs of consumers for different shapes of door panels)Xinhua Wood Factory Appearance  Xinhua Wood Storages  Xinhua Wood Machinery  Xinhua Wood Quality Certificates  Xinhua Wood Factory IntroductionGaotang County Xinhua Wood Industry Co.,

The reason for the deformation of density board furniture is here?    We all know that MDF has a wide range of applications. However, furniture made of this kind of board often has such a problem: the furniture board is deformed, which is very annoying.It not only seriously affects the normal use of our furniture, but also has a bad influence on family life. We knowThere are many reasons for this problem, and we will introduce them in detail below.1.

MDF Mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength, and elastic modulus are better than particleboard.

The following aspects should be paid attention to when choosing medium density fiberboard;1. From the appearance, check whether the thickness and density are uniform, whether the corners are damaged, whether there are delamination, blister, charcolization, etc., and whether there are soft parts.2. When conditions permit, you can saw a small piece of medium density fiberboard and soak it in water with a water temperature of 20°C for 24 hours to observe its thickness change, and at the same time observe whether there are small bulges on the surface of the board.

Advantages of MDF1. The density of medium density fiberboard is very high, so it is called MDF. Its surface can be pasted with melamine or wood veneer. Its physical properties are very good, the material is uniform, and there is no dehydration problem, so it will not be deformed by moisture.2. Medium density fiberboard is made of crushed plant fibers and pressed at high temperature, so the surface of this board is very smooth and square. It can be used not only as furniture materials, but also as decorative panels, light metal sheets, veneer, etc.3. Is MDF high in formaldehyde?1.

The difference between density board and particle board    Solid wood particle board, also known as particle board, is different from MDF, which uses wood fiber and plant fiber as raw material, but uses log particles (small diameter wood, thinning wood, wood core, board skin, branch wood, etc.) The adhesive is processed by high temperature and high pressure.

Medium-density fiberboard is made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other synthetic resin, and pressed under heat and pressure to form a board with a density in the range of 0.50-0.88g/cm3, and other suitable materials can also be added. Additives to improve sheet properties.MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses, so it is widely used in furniture manufacturing, construction, and interior decoration.

According to density, it can be divided into: high-density fiberboard, medium-density fiberboard, and low-density fiberboard (the density of medium-density fiberboard is 500 kg/m3-880 kg/m3, and the density of high-density fiberboard is ≥800 kg/m3).According to the national standard (GB/T 11718-2021), it is divided into: ordinary MDF, furniture MDF and load-bearing MDF.According to the use, it can be divided into: furniture board, floor base material, door panel base material, electronic circuit board, engraving and milling board, moisture-proof board, fire-proof board and line board