High Quality MDF for Construction-manufacture,factory,supplier from China

What details should be paid attention to when density board is veneered?        1. Moderate pressure: generally 2~3MPa, if it is too low, it will affect the bonding strength between the base material and impregnated paper, and if it is too high, it will damage the board.        2. Hot pressing time: it depends on the curing speed of the impregnated resin and the hot pressing temperature, generally 40-50s is appropriate. If the time is too long, the resin will be over-cured, lose its proper elasticity, and cause cracks in the subsequent processing.

What are the advantages of decorative board MDF?    Density board, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Due to its softness, impact resistance and easy reprocessing, MDF is a good material for making furniture abroad. Density board is easy to finishing.

        The reason why anything appears must conform to the laws of the market. The same is true for MDF, which can be widely used mainly because of its advantages in performance and cost.

What are the common wood products in life that are MDF?    The common one may be the table. Some people think that the table should be made of solid wood, but in fact, many tables are made of density board, and then the surface is veneered to make the surface resistant to dirt and wear, and not easy to change color.

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.

How is Xinhua Wood MDF Board?    Xinhua Wood MDF board use fresh polar pine willlow or combi hardwood as raw material, advanced equipments mature production technology, strict quality control systerm , always a pre-production sample and check quality before packing, which ensure good quality and Xinhua Wood has 4 production lines , monthly output 50000 cbm, with sufficient stocks ,can deliver in 15-25 days.MDF Product DisplayThe Usage of MDF Fiberboard Furniture manufacturing: At present, MDF is mainly used to replace natural wood for furniture production.

Prospects for the density fiberboard industry    Compared with natural solid wood boards, MDF is resistant to decay and has no tree burls and knots. It is easier to process various shapes, and MDF has a flat surface, is not easy to deform, and has superior bending strength. It is widely used in furniture production and construction.

Medium density fiberboard    MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses. Therefore, it is widely used in furniture manufacturing, construction and interior decoration industries.    Medium density fiberboard is a homogeneous porous material with good acoustic performance. It is a good material for making speakers, TV shells and musical instruments.   In addition, it can also be used for ships, vehicles, sports equipment, floors, wallboards, diaphragms, etc.

MDF product advantages and development prospects    The surface of MDF is smooth and not easily deformed, the performance is stable, and the edges are relatively strong and firm; the thermal insulation performance is good, and the tensile strength is high. These characteristics are more suitable for furniture manufacturing and interior decoration of construction projects.

MDF uses are as below        1. Furniture manufacturing: At present, fiberboard is mainly used to replace natural wood for furniture production. It can produce all kinds of panel combination furniture or disassembled furniture.        2. Building materials: It can also be used to make doors, wall panels and partitions, room partitions, building components such as corners, and stair railings.        3. Vehicle and ship manufacturing: It can be used in shipbuilding, vehicle inner wall panels, roof panels, partitions, etc.

What is medium density fiberboard (MDF)?      Medium density fiberboard (MDF) is a kind of man-made board made of hardwood, softwood fiber or other plant fiber, which is crushed, separated, dried, applied with urea-formaldehyde resin or other suitable adhesives, and then hot-pressed. Medium-density fiberboard (MDF), generally denser than plywood, is made of separated fibers, but like plywood can be used as a building material.

    Particleboard, also known as chipboard, flakeboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive. It is mainly used in furniture manufacturing and construction industry as well as train and car carriage manufacturing.Method for judging the quality of particleboard wardrobes1. From the appearance point of view, look at the size and shape of the sawdust particles in the center of the cross section. The length is generally 5-10MM.

Advantages and disadvantages of density boardadvantage:      1. The MDF surface is flat and easy to paint. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.      2. Density board is another kind of beautiful decorative board, which is better than solid wood furniture in appearance.      3. All kinds of veneer, printed paper, PVC, gummed paper film, melamine impregnated paper and light metal sheet can be decorated on the surface of MDF.      4.

Medium density fiberboard is a kind of man-made board made of wood or plant fiber through mechanical separation and chemical treatment, mixed with adhesive and waterproof agent, and then formed by high temperature and high pressure.

Particleboard Quality Judgment1. From the appearance point of view, look at the size and shape of the wood chips in the center of the cross-section. The length is generally 5-10MM in length. If the length is too long, the structure is loose, and if it is too short, the deformation resistance is poor, and the so-called static bending strength does not meet the standard;2. The moisture resistance of wood-based panels depends on its density and moisture-proof agent.

     The density of medium density board is between the density of high density board and low density board, generally 650~880kg/m. The common specification is 2440mm*1220mm, and the thickness is 1mm, 3mm, 5mm, 9mm, 12mm, 15mm, 18mm, 25mm, etc. . MDF with other special specifications and thicknesses can also be customized.How to identify high-quality MDF?1.Surface cleanliness: There should be no obvious particles on the surface of the density board with good surface cleanliness.

Where are the functions of different density boards used?1. Standard board: Standard board is a material with a smooth side and a textured finish. It is used for cabinets, drawer bottoms and wall panels that belong to hidden parts.2. Glazed panel: Glazed panel is the surface layer that has been painted, often pasted with facing bricks or stamped into facing bricks or noodle patterns, used for wall panels or wall panels around bathtubs.3. Plastic veneer: Plastic veneer is used for sliding doors, which is good in decoration and easy to clean.

     Particleboard, as a very common decorative material at home and abroad, in addition to conventional furniture manufacturing, particleboard actually has other wider uses, such as suspended ceilings, partition walls, interior decoration, etc.Particleboard has uniform density and thickness, and smooth surface. It is a good veneer substrate. Industrial-grade particleboard can be used in many veneer materials and is very suitable as a veneer substrate.  2.Particleboard furniture refers to furniture that directly uses particleboard as a finish.

How is the quality of MDF furniture?        1. Density board is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. Because of its soft quality, impact resistance, high strength, uniform density after pressing, it is easy to reprocess, but the disadvantage is poor water resistance.        2. The density board is easy to be finished and processed. All kinds of paints and paints can be evenly coated on the density board.

What are the advantages and disadvantages of commonly used density boards in the production of showcases?Advantages of MDF1. Because the density board is hard, it is not easy to deform. At the same time, it is not easy to warp because it is made of fine wood chips. At the same time, the MDF for display cabinets has high bending resistance and impact resistance.2.

MDF Mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength, and elastic modulus are better than particleboard.

Advantages and disadvantages of density FiberboardAdvantages:      1. The MDF surface is flat and easy to paint. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.      2. Density board is another kind of beautiful decorative board, which is better than solid wood furniture in appearance.      3. All kinds of veneer, printed paper, PVC, gummed paper film, melamine impregnated paper and light metal sheet can be decorated on the surface of MDF.      4.

Why is Black Core MDF popular in the wooden door industry?     Carbon is a non-metallic element that is stable at room temperature, unreactive, and has extremely low toxicity to the human body. It can be safely ingested in the form of graphite or activated carbon. Carbon crystal, the full name of carbon microcrystal, is a crystal structure of carbon.

Manufacturing Process Broadcast1. Chipping: It is the manufacturing workshop of the raw materials in the whole board production. It mainly cuts loose wood into wood chips that meet the production specifications, so as to provide better conditions for fiber separation in preparation for heat.2. Thermal grinding. The wood chips cut out of the chipping workshop are preheated and cooked, and then mechanically separated to obtain fibers.3. Fiber drying: heat grinding and sizing to make the moisture content of the fiber reach 40%-50%.