hello-manufacture,factory,supplier from China

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.

     Particleboard, as a very common decorative material at home and abroad, in addition to conventional furniture manufacturing, particleboard actually has other wider uses, such as suspended ceilings, partition walls, interior decoration, etc.Particleboard has uniform density and thickness, and smooth surface. It is a good veneer substrate. Industrial-grade particleboard can be used in many veneer materials and is very suitable as a veneer substrate.  2.Particleboard furniture refers to furniture that directly uses particleboard as a finish.

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.

The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000.    After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.   After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

    Density board, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board.

What is Black MDF ? What advantages does Black MDF have?    Carbon is a non-metallic element that is stable at room temperature, unreactive, and has extremely low toxicity to the human body. It can be safely ingested in the form of graphite or activated carbon. Carbon crystal, the full name of carbon microcrystal, is a crystal structure of carbon.

      Density board is called density fiberboard. It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.     According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard.

Advantages:A. Good sound absorption and sound insulation performance; Thermal insulation and sound absorption of particle board;B. The interior is a cross scattered granular structure, the performance of each part is basically the same, and the lateral bearing weight is relatively poor;C. The surface of particle board is flat and can be used for various veneers;D. In the production process of particle board, the amount of glue used is small, and the environmental protection coefficient is relatively high. Shortcomings:A.

Medium-density fiberboard is made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other synthetic resin, and pressed under heat and pressure to form a board with a density in the range of 0.50-0.88g/cm3, and other suitable materials can also be added. Additives to improve sheet properties.MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses, so it is widely used in furniture manufacturing, construction, and interior decoration.

What are the advantages and disadvantages of commonly used density boards in the production of showcases?Advantages of MDF1. Because the density board is hard, it is not easy to deform. At the same time, it is not easy to warp because it is made of fine wood chips. At the same time, the MDF for display cabinets has high bending resistance and impact resistance.2.

1. The use of particleboard in flooring:Particleboard is used as flooring material in temporary structures with less load. It is also widely used as a covering for hardwood floors because hardwood planks have low resistance to scratches to protect them. Wood veneer particleboard or laminated particleboard is used for floors where a finished aesthetic look is desired.2. Use of particleboard in floor underlayment:Particleboard is widely used as floor underlayment or as a basis for parquet, wooden or carpet floors.

Medium density fiberboard is a kind of man-made board made of wood or plant fiber through mechanical separation and chemical treatment, mixed with adhesive and waterproof agent, and then formed by high temperature and high pressure.

Which is better, particleboard or density boardThe physical properties of density board and particle board are different, and there are not small differences in many aspects. When we evaluate building materials, it is difficult to determine which one is strong and which is weak. Most of the time, we need to decide which building materials to choose according to the occasion and space used. Of course, from the perspective of interior space, density board is obviously better than particle board. Why is this?The nature of the whole MDF board is the same, and its plasticity is very good.

What is carbon crystal wooden door？ Carbon crystal is a kind of microcrystalline carbon particles purified from minerals, commonly known as high carbon graphite. This material is harder than steel and lighter than aluminum, it is high temperature resistant, corrosion resistant, and has a stable molecular structure. Carbon crystal fiber board, waterproof, zero formaldehyde, ultra-high density, is a high-end product worth having. And the carbon crystal wooden door, the wooden door made of this carbon element crystal.Advantages of carbon crystal wood doors1.

Carbon Crystal Panel and Its AdvantagesCarbon crystal panel is generally used in paint-free technology, with high environmental protection and good moisture resistance. In terms of materials, they all belong to composite boards. If they are under the same brand, the quality of carbon crystal boards is better. In contrast, carbon crystal panels are waterproof, moisture-proof, environmentally friendly, formaldehyde-free, crack-resistant and non-deformable. Carbon crystal plate is a new type of high-tech environmental protection material.

What details should be paid attention to when density board is veneered?        1. Moderate pressure: generally 2~3MPa, if it is too low, it will affect the bonding strength between the base material and impregnated paper, and if it is too high, it will damage the board.        2. Hot pressing time: it depends on the curing speed of the impregnated resin and the hot pressing temperature, generally 40-50s is appropriate. If the time is too long, the resin will be over-cured, lose its proper elasticity, and cause cracks in the subsequent processing.

MDF product advantages and development prospects    The surface of MDF is smooth and not easily deformed, the performance is stable, and the edges are relatively strong and firm; the thermal insulation performance is good, and the tensile strength is high. These characteristics are more suitable for furniture manufacturing and interior decoration of construction projects.

    The production methods of particleboard are divided into the flat pressing method of intermittent production, the extrusion method of continuous production and the rolling method according to the different slab forming and hot pressing process equipment.     In actual production, the flat pressing method is mainly used.

      Waterproof and moisture-proof board is made by adding special materials that can improve the waterproof, moisture-proof and mildew-proof performance of wood-based panels during the production of medium-density fiberboard.   It is suitable for high-humidity areas and places where accidental humidity may occur, such as kitchens Cabinets, bathroom vanity, laundry cabinet. Marked in green.

How to choose good quality MDF?1.Surface cleanliness: There should be no obvious particles on the surface of the density board with good surface cleanliness. Particles are caused by impurities brought in during the pressing process, which not only affects the appearance, but also makes the paint film easy to peel off.2.Surface smoothness: When touching the surface with hands, it should feel smooth. If it feels astringent, it means that the processing is not in place.3.Surface smoothness: The surface of the density board should be bright and smooth.

Uses of Particleboard1. As a base material: Industrial grade particleboard is suitable as a base material for veneer, and many veneer materials are available. Particleboard has uniform density, small thickness tolerance, and smooth surface, which is a good veneer substrate.2. Kitchen cabinets: Particleboards can be used as cabinet shelves, side panels, back panels, drawers, doors and other parts. Particleboards have performance and economic advantages. The grades of kitchen cabinet boards are M- -S, M- -2, M---3.3.

An Introduction to OSB Board      OSB is Oriented Strand Board ,the upgrading of traditional particle board.