Good Price MDF for Door Panel-manufacture,factory,supplier from China

The difference between density board and particle board    Solid wood particle board, also known as particle board, is different from MDF, which uses wood fiber and plant fiber as raw material, but uses log particles (small diameter wood, thinning wood, wood core, board skin, branch wood, etc.) The adhesive is processed by high temperature and high pressure.

Why choose Xinhua Wood MDF boards?1. Competitive price.

What are the factors that affect the price of density board?  1. The production of density board depends heavily on the stable supply of wood raw materials, so the price of wood affects the price of density board.2. Formaldehyde is one of the main ingredients for the production of density boards. The price of formaldehyde is highly correlated with the price of density boards. At the same time, the raw material for formaldehyde production is mainly methanol. Therefore, the prices of fossil energy such as oil, natural gas and coal also affect the price of density boards.3.

     It is said that wall panels originated in England in the 16th century. Everyone knows that the climate in England is cold and humid. In order to block the damp and cold lower part of the wall, wall panels are used for insulation.    Another theory goes back to the Netherlands in 1300. At that time, Europe was in the dark Middle Ages, and knights wearing armor and holding long swords often scratched the walls of castles or palaces inadvertently. Protect with wood.     At the beginning, wall panels were mainly used in castles and palaces.

The difference between particleboard and density board:1. Different usesDensity board is mainly used for composite floors, door panels, partition walls, furniture, etc. In home decoration,it is mainly used for surface treatment of mixed oil technology. It can be used as the back panel of the cabinet, but it is not suitable for the cabinet body. Particleboard can be painted and veneered in various ways, and can also be used to make cabinets.2.

Features of MDF1. The material is uniform, the layer structure is dense, the surface is smooth and clean, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and layer; non-toxic, tasteless, non-radiation, good air permeability;2. Good heat insulation performance, no aging, strong adhesion;3.

Medium Density Fiberboard classification:       According to the density, it can be divided into high-density board, medium-density board, and low-density board (the density of medium-density board is 550 kg-880 kg/m3, and the density of high-density board is more than 880 kg/m3). Commonly used specifications are 1220*2440mm and 1525*2440mm, and the thickness is 2.0mm~25mm.

Advantages of MDF     1. The material is relatively thin, and the cutting surface will be sealed well when sealing the edge, so that it will not be easy to open the glue.     2. It is easy to press into various shapes, and it is easy to make shapes, so there are usually more door panels or back panelsXinhua Wood Factory Appearance  Xinhua Wood Machinery   Xinhua Wood Storages  Xinhua Wood Quality Certificates  Xinhua Wood IntroductionGaotang County Xinhua Wood Industry Co., Ltd.

Where are the functions of different density boards used?1. Standard board: Standard board is a material with a smooth side and a textured finish. It is used for cabinets, drawer bottoms and wall panels that belong to hidden parts.2. Glazed panel: Glazed panel is the surface layer that has been painted, often pasted with facing bricks or stamped into facing bricks or noodle patterns, used for wall panels or wall panels around bathtubs.3. Plastic veneer: Plastic veneer is used for sliding doors, which is good in decoration and easy to clean.

Medium-density fiberboard is made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other synthetic resin, and pressed under heat and pressure to form a board with a density in the range of 0.50-0.88g/cm3, and other suitable materials can also be added. Additives to improve sheet properties.MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses, so it is widely used in furniture manufacturing, construction, and interior decoration.

    Moldability: Since the MDF is fibrous, it is beneficial for the machine to do carving, molding, radian and other shapes. The molded door panels and European-style lines on the market are all MDF, so MDF is more suitable for the back of the wardrobe and Door panels and moldings.Matters needing attention in making wardrobe with MDF1. From the appearance, check whether the thickness and density are uniform, whether the corners are damaged, whether there are layers, bulges, carbonization, etc., and whether there are soft parts.2.

      Product performance of medium density board: uniform material, dense layer structure, smooth and smooth surface, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and delaminate; non-toxic, tasteless, non-radiative, and good air permeability.MDF is mainly used for: laminate flooring, door panels, partition walls, furniture, etc., and is mainly used for the surface of mixed oil process in home decoration.Xinhua Wood Factory Scene  Xinhua Wood Machinery  Xinhua Wood IntroductionGaotang County Xinhua Wood Industry Co.,

Features of MDF:1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machinability. It can be pasted with sliced veneer or with novel and beautiful patterns.

  1. The characteristics of density board: the surface of density board is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is decorative. However, density boards have poor moisture resistance, and in comparison, density boards have poorer nail-holding power than particle boards. If the screws loosen after tightening, it is difficult to fix them again due to the low strength of density boards.2. The use of MDF: mainly used for laminate flooring, door panels, partition walls, furniture, etc.

The benefits of MDF:Good flexibility (Because the door panel is often pushed and pulled to open and close, if it is too hard, it will easily lead to cracking, so this advantage of MDF can just be used)Easy to shape (because it is a powder structure, and very flat and smooth, so it is easy to shape, which just meets the needs of consumers for different shapes of door panels)Xinhua Wood Factory Appearance  Xinhua Wood Storages  Xinhua Wood Machinery  Xinhua Wood Quality Certificates  Xinhua Wood Factory IntroductionGaotang County Xinhua Wood Industry Co.,

MDF processing performance:Medium density fiberboard can be produced from a few millimeters to tens of millimeters thick, can replace any thickness of wood, square timber, and has good mechanical processing performance, sawing, drilling, slotting, tenoning, sanding and engraving , The edge of the plate can be processed according to any shape, and the surface is smooth after processing.Due to its excellent performance and an effective way to comprehensively and rationally utilize wood, MDF is one of the most promising products at present.Medium density fiberboard features:1.

Carbon crystal panels have many advantages, including:1. Strong durability: carbon crystal plate has the characteristics of high strength and wear resistance, and can maintain its original performance and appearance in long-term use.2. Ultra-thin and light: the carbon crystal plate is very thin and light in weight, which can reduce the weight of the overall decoration material, and is also easier to transport and install.3.

1. Physical and mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength and elastic modulus are good. However, because MDF is made of logs that are ground into fibers, which completely changes the structure of the wood, it has higher moisture absorption, water absorption performance, and higher thickness expansion rate, and its nail holding power is worse than that of particleboard.2.

   Particle board is also referred to as chipboard or flakeboard, it's a form of wood-primarily based panel made of timber or different lignocellulosic materials and stuck under warmth and strain after applying adhesive.

Is MDF or solid wood particle board better? Compare the advantages and disadvantages of the two:MDF:Advantages: The material is delicate, the edge sealing of the cutting surface is well done, it is not easy to open the glue, and it is convenient to make various shapes, so it is often used to make door panels or back panels.2. Disadvantages: The base material is powder, and the glue used is more than particle board, so it is easy to have environmental protection problems.

     In foreign countries, density board is a good material for making furniture. Density board can be selectively used to make furniture products. When we choose and buy, it is best to choose brand products. We all know that density boards are not good at holding nails, so we need to use a lot of glue for bonding when making furniture. , so we need to detect the content of formaldehyde. Density furniture uses wood-based panels as its inner material, so its material is not easy to deform, and it will not be infested with insects.

Advantages of MDFThe surface is smooth and flat, the edges are firm, the surface decoration is good, and it is easy to finish and process. All kinds of paints and paints can be evenly slaughtered on MDF boards. Various veneers, adhesive tape films, light metal sheets, and melamine boards can be pasted on the surface. , good physical properties, no dehydration problem.

Variety of Wood Panel1. Low density fiberboard It is a panel made of wood or plant fiber shavings that are applied with a large amount of urea-formaldehyde glue and auxiliary materials. Its density is lower than 450 kg/m3, the fiber particles are larger, the internal structure is not uniform, the strength is relatively insufficient, and the weight is light.2. Medium density fiberboardIt is a board made of wood fiber or other plant fiber, added with urea-formaldehyde adhesive, and pressed under high temperature and high pressure.

Xinhua Wood ProductsSpecification of  MDF for DecorationMDF BoardSize1220×2440mm or can be customized Thickness1mm-30mmMoisture6%-8%Core panelWood fiberColor wood color, surface can be made with different treatmentSurfacematt,embossed, glossy, leather,wave,synchronize etc...GlueE0/E1/E2/CARB P2/F4Applicationkitchen cabinets, wardrobe door, shoes cabinet, TV cabinet, funiture boardsMOQ1*20GP containerFree SampleAvailable at any timePackaging DetailsPackage of 4x8 MDF Board with 18mm thickness ;Items per Carton: 50 Pieces / Pallet;Items per Container: 8 Pallets / Contain