Flooring-manufacture,factory,supplier from China

What is Black Core HDF?    The Black Core HDF floor is a floor made of this carbon crystal.    Carbon crystal is a kind of microcrystalline carbon particles purified from minerals, commonly known as high carbon graphite.

MDF HDF Details  Size:1220*2440 1250*2500 or customized sizeThickness:1-30mmGlue:E0 /E1 /E2Material:Polar pine combiDensity:650-980 kg/m3Certificate:ISO, SGS, FSC,P2Moisture Content:4-6%Usage:for laminating board, furniture back panel, flooring, interior and exterior decorationMOQ:1X40HQPayment Term:T/T or 100% LC at sightPacking:Standard exporting palletsDelivery time:20 days after received dopositMDF HDF Properties    EN622-5:2009 MDF-GPPropertyTest MethodUnitRanges of nominal thickness (mm)1.8-2.52.5-44-66-99-1212-1919-3030-45＞45Swelling in Thickness 24 hEN317%45353

      Product performance of medium density board: uniform material, dense layer structure, smooth and smooth surface, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and delaminate; non-toxic, tasteless, non-radiative, and good air permeability.MDF is mainly used for: laminate flooring, door panels, partition walls, furniture, etc., and is mainly used for the surface of mixed oil process in home decoration.Xinhua Wood Factory Scene  Xinhua Wood Machinery  Xinhua Wood IntroductionGaotang County Xinhua Wood Industry Co.,

1. The use of particleboard in flooring:Particleboard is used as flooring material in temporary structures with less load. It is also widely used as a covering for hardwood floors because hardwood planks have low resistance to scratches to protect them. Wood veneer particleboard or laminated particleboard is used for floors where a finished aesthetic look is desired.2. Use of particleboard in floor underlayment:Particleboard is widely used as floor underlayment or as a basis for parquet, wooden or carpet floors.

  1. The characteristics of density board: the surface of density board is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is decorative. However, density boards have poor moisture resistance, and in comparison, density boards have poorer nail-holding power than particle boards. If the screws loosen after tightening, it is difficult to fix them again due to the low strength of density boards.2. The use of MDF: mainly used for laminate flooring, door panels, partition walls, furniture, etc.

      MDF is mainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, because the density of high-density boards is too high. It cracks easily, so there is no way to make furniture.       Generally, HDF is used for indoor and outdoor decoration, office and civilian furniture, audio, and vehicle interior decoration. It is also a good material for packaging.

Medium Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Mainly used for laminate flooring, door panels, partition walls, furniture, etc.

The main purpose of MDF FiberboardMainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, and high-density boards are used for interior decoration. Exterior decoration, office and civilian furniture, audio, vehicle interior decoration, can also be used as anti-static floor in computer room and production material for wall panels, security doors, wall panels, partitions, etc. It is also a good material for packaging.

Advantages of MDF1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machining performance. It can be pasted with sliced veneer, patterns and novel and beautiful decorative papers. Therefore, it is very popular in home decoration and is often used to make furniture and partitions.3. It can be used as the middle frame and middle clip strip in the modern decorative frameless painting.

Manufacturing Process Broadcast1. Chipping: It is the manufacturing workshop of the raw materials in the whole board production. It mainly cuts loose wood into wood chips that meet the production specifications, so as to provide better conditions for fiber separation in preparation for heat.2. Thermal grinding. The wood chips cut out of the chipping workshop are preheated and cooked, and then mechanically separated to obtain fibers.3. Fiber drying: heat grinding and sizing to make the moisture content of the fiber reach 40%-50%.

Medium density fiberboard    MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses. Therefore, it is widely used in furniture manufacturing, construction and interior decoration industries.    Medium density fiberboard is a homogeneous porous material with good acoustic performance. It is a good material for making speakers, TV shells and musical instruments.   In addition, it can also be used for ships, vehicles, sports equipment, floors, wallboards, diaphragms, etc.

The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000.    After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.   After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

The differences between flame-retardant MDF and ordinary MDF are analyzed one by one as follows: 1. Color The color of flame-retardant MDF is dyed with red dye, so red MDF is not necessarily flame-retardant MDF Board, this point cannot be identified. 2. Physical and mechanical properties Due to the addition of flame retardants, the water-absorbing expansion of the board is affected to a certain extent. Therefore, testing the water-absorbing expansion coefficient of the board can preliminarily judge whether the flame-retardant MDF can meet the use requirements.

Product performance  The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.   The board surface texture is fine and smooth.

Product performance    The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.     The board surface texture is fine and smooth. When the ambient temperature and humidity change, the size stability is good, and the surface decoration treatment is easy.

     Particleboard is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying an adhesive, also known as particle board and particle board.

1.

Advantages of Carbon Crystal Plates or Black MDFCarbon crystal panels are environmentally friendly, durable, moisture-proof, flame-retardant, sound-absorbing, anti-aging and other practical and excellent features, helping you easily have a healthy, environmentally friendly and safe living home.Noise reductionThe carbon crystal wall panel has a good diffuse reflection for sound, and has a relatively buffering impact of the subwoofer; the sound insulation has reached 29 decibels after testing, which is 13 decibels higher than the sound insulation of a 25 cm wall, which solves the incoming noise

With the continuous development of science and technology, carbon crystal panels or Black Core MDF, as a new type of decoration material, have gradually attracted people's attention. So, what are the advantages and disadvantages of Black Core MDF in whole house decoration? Let's take a look together.First, the advantages of Black Core MDF1). Environmental protection and healthBlack Core MDF is a kind of non-toxic, tasteless, non-radiation environmental protection material, which will not cause any harm to the human body.

Advantages and disadvantages of density FiberboardAdvantages:      1. The MDF surface is flat and easy to paint. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.      2. Density board is another kind of beautiful decorative board, which is better than solid wood furniture in appearance.      3. All kinds of veneer, printed paper, PVC, gummed paper film, melamine impregnated paper and light metal sheet can be decorated on the surface of MDF.      4.

How to deal with the pungent smell of the density board?1） Keep the room ventilated and paint the MDF with anti-mildew paint.Put the density board in a dry place at home, keep the room ventilated, and it can be exposed to the sun if it is severely damp. Go to the market to buy anti-mildew paint and paint the MDF. It can play a certain role in preventing moisture and mildew, but pay attention to the quality of the paint and choose non-toxic and tasteless products.

    Density board, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board.

    MDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. A kind of man-made board.The thickness of MDF is generally between 3mm-30mm, and the density of MDF is very high. Generally, the choice of MDF depends on the density of MDF to determine the quality of MDF. The density of MDF is generally It is in the range of 0.5-0.8g/cm³.